Inicio > Productos > Tubo UHMWPE > Tubo de dragado UHMWPE

UHMWPE Slurry Pipe

Atributos de la tubería UHMWPE

UHMWPE Raw Material Properties

PropertyRaw Material Values Only
PHYSICAL PROPERTIES
Raw MaterialUHMWPE
Density (kg/m3)≥ 930
Water Absorption 24hrs(%)<0.01
MECHANICAL PROPERTIES
Tensile strength at Break (Mpa)≥ 29
Elongation at Break(%)≥ 300
Impact strength(KJ/㎡)≥ 150
Wear Loss (Factory test)< 28%
Coefficient of Friction (unplaned)0.009
Shore Hardness( R)65-70
THERMAL PROPERTIES
Coefficient of Linear Expansion(10-4)1.5
Heat Deflection Temp at 0.45 Mpa(℃)≥ 50
ELECTRICAL PROPERTIES
Surface Resistivity(Ohm)1109Ω


UHMWPE slurry pipe benefits:

1. High Wear Resistant

Compare with existing plastic pipes, Wear resistant UNMWPE pipe has the most excellent wear resistance which is 4 to 7 times that of Q235 steel pipe and 2.7 times that of wear-resistant steel 16Mn. Therefore it increases pipe flow rate and improves the transmission efficiency of more than 20%. The working life of UHMWPE pipes is more than 3 times that of wear-resistant steel pipe. Wear resistant UHMWPE pipe has great advantages to replace traditional metal pipes in delivering abrasive media.


2. Impact Resistant

Wear resistant UHMWPE pipe is greatly impact resistant which is 5 times that of HDPE pipe, 2 times that of PC pipe and 10 times that of PTFE pipes.With extraordinary impact resistance,UHMWPE pipe can withstand great water hammer impact when starting up pump station.


3. Low Energy Consumption

Wear resistant UHMWPE pipe is self-lubrication and non-adhesive. Its coefficient of friction resistance is 0.009 while that of steel pipe is 0.013. With the same diameter, flow rate of UHMWPE pipe is larger than steel pipe, and with the same flow rate, UHMWPE pipe can save 25% energy.


4. Non-scaling

With roughness of 0.00022 and smooth pipe inner wall, it can efficiently avoid scaling without acid cleaning, which save a lot of maintenance cost.


5. High Flexibility

With high toughness and elongation of no less than 350%, the UHMWPE pipe and the connection site will not crack when crust settling which maximally ensures to supply water normally.


Specifications of UHMWPE Slurry Pipe:

I.D
mm
WALL THICKNESS      mm
0.6Mpa0.8 Mpa1.0 Mpa1.25 Mpa1.6 Mpa2.0 Mpa
150781114
20079111418
2508.410.612.915.719.924.7
3009.712.31518.523.429.3
35091215192532
400101417222936
450121620253241
500131722273645
550141924303950
6001521263343
6501722283646
7001824303850
75019263341
80021283544
85022293747
90023313949
1000263443
1100283848
12003141


Custom sizes available, where moulds already exist from 50-1200mm OD, up to 65 WT. Product can be manufactured in any colour, and to all conformance requirements.

Aplicación clave de la tubería UHMWPE

Sin Contenidos